Multihopping VPNs (on Linux)
"Multihop", also known as "cascading" or "chaining", would be connecting to one VPN, then using that tunnel to connect to another, etc.Basically:
To do something like the pic above, first download this script and save it to wherever your OpenVPN configs are, /etc/openvpn/multihop.sh for example.
Open up a Terminal and `su -` to get root, then do `cd /etc/openvpn/; chmod +x multihop.sh` to get to /etc/openvpn/ and make the script is executable.
In this example, we'll first connect to our ECC Paris UDP node for the first hop using the command:
openvpn --config France-Paris_UDP.ovpn --script-security 2 --route remote_host --persist-tun --up multihop.sh --down multihop.sh --route-noexecEnter your token for the username if your config isn't setup to automatically fill that in.
In the OpenVPN output, you'll see something like this towards the end:
Fri Mar 29 04:14:00 2019 multihop.sh tun0 1500 1553 10.66.74.11 255.255.255.0 init MULTIHOP HINT: For the next hop, start openvpn with: openvpn --config <config.ovpn> --script-security 2 --route remote_host --persist-tun --up multihop.sh --down multihop.sh --route-noexec --setenv prevdns 212.129.46.32 --setenv hopid 2 --setenv prevgw 10.66.74.1 --lport 1195 DNS Leak Protection: Enabled Fri Mar 29 04:14:00 2019 Initialization Sequence Completed
Like it says in the hint, copy/paste that entire long command, being sure to change the "<config.ovpn>" to whatever config you want to use for the next hop.
We'll use our ECC Frankfurt UDP server for hop #2 in this example:
openvpn --config DE-Frankfurt_UDP.ovpn --script-security 2 --route remote_host --persist-tun --up multihop.sh --down multihop.sh --route-noexec --setenv prevdns 212.129.46.32 --setenv hopid 2 --setenv prevgw 10.66.74.1 --lport 1195That will connect you to our Frankfurt server, but using the first Paris tunnel.
Your internet traffic will now be "double hopped" past those two VPN nodes before it reaches the internet.
You could stop here, or you could do more hops.
As with the first hop, this Frankfurt one also shows a "MULTIHOP HINT":
Fri Mar 29 04:14:29 2019 multihop.sh tun1 1500 1553 10.66.122.139 255.255.255.0 init MULTIHOP HINT: For the next hop, start openvpn with: openvpn --config <config.ovpn> --script-security 2 --route remote_host --persist-tun --up multihop.sh --down multihop.sh --route-noexec --setenv prevdns 212.129.46.32 --setenv hopid 3 --setenv prevgw 10.66.122.1 --lport 1196 DNS Leak Protection: Enabled Fri Mar 29 04:14:30 2019 Initialization Sequence Completed
Same as before, copy/paste the long command, changing "<config.ovpn>" to whatever config you want to use for the next hop.
If you want to add more hops, just keep following the hints.
Keep in mind though, your speed will decrease with each hop, and your routing table will increase exponentially.
The maximum number of hops possible would vary depending on your computer/connection, but we recommend staying within 3-5 hops.
For an extra layer of anonymity, you could also chain together configs from different VPN providers, so long as they support OpenVPN.
Since OpenVPN supports SOCKS proxies, you could also add Tor into the mix fairly easily.
Just start up Tor Browser, which by default starts a SOCKS proxy on 127.0.0.1 on port 9150, then tell OpenVPN to use that by adding to the above commands:
--socks-proxy 127.0.0.1 9150That would tell OpenVPN to first connect to Tor, then to the VPN server.
However, that would only work with T***** OpenVPN servers, and you also need to add an exclusion so that tor doesn't also use the VPN by adding:
--route $TOR_IP_CHANGEME 255.255.255.255 net_gatewayThe $TOR_IP_CHANGEME part needs to be changed to that IP. To find it, run this command and you should see the Tor IP that you're connected to:
root@x:~# netstat -nap | grep torIn this example, I'd change the above $TOR_IP_CHANGEME to 217.182.198.95
t***** 0 0 127.0.0.1:9050 0.0.0.0:* LISTEN 626/tor t***** 0 0 10.1.10.22:44142 217.182.198.95:443 ESTABLISHED 626/tor t***** 0 0 127.0.0.1:9050 127.0.0.1:42528 ESTABLISHED 626/tor